View T550B107K008AH4251_8553084.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 1 benefts ? i ncludes f-tech anode which eliminates hidden defects in the dielectric ? 1 00% simulated breakdown screening ? m aximum operating temperature of +105c ? m eets all requirements of dla drawing 13030 ? p olymer cathode technology ? e xtremely low esr ? h igh frequency capacitance retention ? l ow temperature capacitance retention ? 1 00% accelerated steady state aging (240 hours) ? 1 00% surge current tested, 10 cycles +25c ? volumetrically effcient ? n on-ignition failure mode ? a pproximately 25% lighter than equivalent wet tantalum ? ca se dimensions equivalent to milCprfC39006/22/25/30/31 overview the kemet t550 series polymer hermetic seal (phs) is a tantalum capacitor with a ta anode and ta 2 o 5 dielectric. a conductive organic polymer replaces the traditionally used mno 2 or wet electrolyte as the cathode plate of the capacitor. this results in very low esr and improved capacitance retention at high frequency and low temperature. the t550 series phs also exhibits a benign failure mode which eliminates the case breach that can occur in wet tantalum types. additionally, this part may be operated at voltages up to 80% of rated voltage with equivalent or better reliability than traditional mno 2 or wet tantalum capacitors operated at 50% of rated voltage. t550 series phs also offers higher ripple current handling capability and a lower esr range than wet tantalums. with reduced esr and enhanced capacitance retention at higher frequencies and low temperatures, the t550 series phs provides the highest total capacitance and the most economical solution for high power applications, all within an approximately 25% lighter package than the equivalent wet tantalum capacitor. tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series applications typical applications include high voltage power management such as buck/boost converters, fltering, hold-up capacitors, and other h igh ripple current applications. one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 2 2 ordering information t 550 b 107 m 025 a t 4251 capacitor class series case size capacitance code (pf) capacitance tolerance rated voltage (vdc) product level termination finish surge option sleeve option t = tantalum 550 = polymer hermetic seal b first two digits represent signifcant f gures. third d igit specifes n umber of zeros. k = 10% m = 20% 006 = 6.3 008 = 8 015 = 15 025 = 25 040 = 40 050 = 50 060 = 60 075 = 75 100 = 100 a = n/a b* = dla 13030 standard reliability t* = dla 13030 high reliability t = 100% tin (sn) plated h = tin/lead (snpb) solder coated (5% pb minimum) blank = 25c 5c, 10 cycles, after constant voltage conditioning (kemet standard) 4251 = 10 cycles, -55c and +85c after voltage aging 4252 = 10 cycles, -55c and +85c before voltage aging blank = sleeved 0100 = unsleeved 7200 = tape & reel 7293 & 7443 = ammo * only available on select parts. refer to part number table for details. ordering information C dla series 13030 -01 k a s l b drawing number dash number capacitance tolerance surge current testing insulation lead length product level see part number table k = 10% m = 20% a = +25c 5c, 10 cycles, after constant voltage conditioning (kemet standard) b = -55c -5c, +0c and +85c 5c; after constant voltage conditioning. c = -55c -5c, +0c and +85c 5c; before constant voltage conditioning. s = sleeved u = unsleeved l = 1.50 inches (standard) b = standard reliability t = high reliability * standard terminations for dla pn's is "h" (snpb) performance characteristics item performance characteristics operating temperature -55c to 105c rated capacitance range 20 f to 820 f at 120 hz/25c * capacitance tolerance k tolerance (10%), m tolerance (20%) rated voltage range 6 C 100 v df (120 hz at 25c) refer to part number electrical specifcation table e sr (100 khz at 25c) refer to part number electrical specifcation table l eakage current refer to part number electrical specifcation table (at rated voltage up to +85c and 78% of rated voltage applied at 105c) packaging according milCprfC39006 kemet does not recommend storage above 85oc. * additional case sizes and capacitance/voltage are under development. tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 3 3 qualifcation test performed method reference test conditions reliability and environmental tests ac ripple life at 85?c m ilCprfC39006 85?c, 40 khz ripple current, 2,000 hours 85?c l ife milCprfC39006 85?c, rated voltage, 2,000 hours 105?c l ife kemet standard 105c, 0.78 x rated voltage, 2,000 hours surge voltage milCprfC39006 85?c, 1.15 x rated voltage, 1,000 cycles, except delta cap shall be +10%/-20% surge current milCprfC39003 +25 oc, 10 cycles (option a), option b available low temperature storage milCprfC39006 -62?c for 72 hours followed by 1 hour at 125?c reverse voltage kemet catalog 1 v for 8 hours maximum at 25c, 1 v for 2 hours maximum at 70c physical, mechanical and process tests visual and mechanical examination (internal and external) milCprfC39006 case dimensions, marking terminal strength milCprfC39006 pull test and wire lead bend test resistance to solvents milCprfC39006 immersion in (3) solvents resistance to soldering heat milCprfC39006 immersed to within 0.05 inch of capacitor body solderability milCprfC39006 depth of insertion in fux and solder to within 0.062 inch of welded joint shock and vibration milCstdC202, methods 213, 204 shock method 213, condition i, 100 g peak, vibration method 204, condition d, 20 g peak barometric pressure (reduced) milCprfC39006 150,000 feet for 5 minutes, voltage applied for 1 minute salt atmosphere (corrosion) milCprfC39006 subjected to fne mist of salt solution moisture resistance milCprfC39006 65?c at 6 volts dielectric withstanding voltage milCprfC39006 2,000 vdc, 60 seconds, sleeving examined for evidence of breakdown insulation resistance milCprfC39003 500 vdc, 1 minute, insulation resistance not less than 1,000 m electrical characterization temperature stability reference milCprfC39006 -55?c t o 1 05?c frequency scan kemet standard impedance, esr and capacitance versus frequency tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 4 4 qualifcation C dla approval inspection inspection test name dla requirement paragraph ss/lot group i shock ( specifed p ulse) 1 3.3.4 6 per case size vibration, high frequency 1 3.3.5 thermal shock 3.3.6 salt atmosphere 3.3.7 group ii solderability 3.3.8 12 terminal strength 3.3.9 surge voltage 2 3.3.10 moisture resistance 3.3.11 dielectric withstanding voltage 3.3.12 insulation resistance 3.3.13 low temperature (storage) 3.3.14 group iii stability at low and high temperatures 3.3.15 13 reverse voltage 3.3.23 12 per condition group iv life at 85?c 3.3.16 102 group v ac ripple life at 85oc 3.3.18 8 per case size group vi life at 105oc 3.3.17 40 barometric pressure 3.3.20 group vii resistance to solvents 3.3.21 6 resistance to soldering heat 3.3.22 1 no failures for mechanical shock or vibration tests shall be permitted. 2 surge voltage change in capacitance limits are wider than those in some subsequent tests. it may be necessary to perform initial measurements again, prior to the individual tests of group ii. product level: inspection of product for delivery shall consist of: b level group a inspection specifed in drawing 13030 t level group a and group b inspections specifed in drawing 13030 tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 5 5 0 20 40 60 80 100 120 10 100 1,000 10,000 100,000 1,000,000 capacitance ( f) frequency (hz) +125c +85c +50c +25c 0c -25c -55c -80c 0.0 0.1 1.0 10.0 10 100 1,000 10,000 100,000 1,000,000 10,000,000 esr (mohms) frequency (hz) electrical characteristics esr vs. frequency capacitance vs. frequency tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 6 6 dimensions C inches (millimeters) side view end view l b 1.50 0.250 (38.10 6.35) d + c 1.50 0.250 (38.10 6.35) 0.094 (2.39) maximum case code case size uninsulated case insulated case mil-prf-39006 l 0.031 (0.79) d +0.016 (0.41) -0.015 (0.38) m 0.002 (0.05) j max d +0.016 (0.41) -0.015 (0.38) l 0.031 (0.79) b t2 0.650 (16.51) 0.279 (7.09) 0.025 (0.64) 0.822 (20.88) 0.289 (7.34) 0.686 (17.42) table 1 C ratings & part number reference rated v o l t a g e rated capacitance case size kemet part number dla drawing number dc leakage df maximum esr ripple current (v) 85oc f kemet/eia (see below for part options) (see below for part options) a at 25c maximum/5 minutes % at 25oc 120 hz max m at 25oc 100 khz marms at 85oc/40 khz 6 140 b t550b147(1)006a(3) n/a 6.3 5.0 120 1510 6 820 b t550b827(1)006a(3) n/a 36.9 5.0 90 1750 8 220 b t550b227(1)008a(3) n/a 13.2 5.0 120 1510 8 680 b t550b687(1)008a(3) n/a 40.8 5.0 90 1750 10 100 b t550b107(1)010a(3) n/a 7.5 5.0 140 1400 10 180 b t550b187(1)010a(3) n/a 13.5 5.0 110 1580 10 560 b t550b567(1)010a(3) n/a 42.0 5.0 90 1750 15 70 b t550b706(1)015a(3) n/a 7.9 5.0 140 1400 15 120 b t550b127(1)015a(3) n/a 13.5 5.0 110 1580 15 390 b t550b397(1)015a(3) n/a 43.9 5.0 90 1750 25 50 b t550b506(1)025a(3) n/a 9.4 5.0 170 1275 25 100 b t550b107(1)025(2)(3) 13030-01(1)(4)(5)l(6) 18.8 5.0 190 1200 30 40 b t550b406(1)030a(3) n/a 9.0 5.0 170 1275 30 68 b t550b686(1)030a(3) n/a 15.3 5.0 140 1400 35 330 b t550b337(1)035a(3) n/a 86.6 10.0 180 1240 40 100 b t550b107(1)040(2)(3) 13030-02(1)(4)(5)l(6) 30.0 5.0 150 1350 40 120 b t550b127(1)040(2)(3) 13030-03(1)(4)(5)l(6) 36.0 5.0 120 1510 50 25 b t550b256(1)050a(3) n/a 9.4 5.0 170 1275 50 47 b t550b476(1)050a(3) n/a 17.6 5.0 150 1350 50 100 b t550b107(1)050(2)(3) 13030-04(1)(4)(5)l(6) 37.5 5.0 130 1450 50 120 b t550b127(1)050(2)(3) 13030-05(1)(4)(5)l(6) 45.0 5.0 90 1750 60 20 b t550b206(1)060a(3) n/a 9.0 5.0 200 1175 60 39 b t550b396(1)060a(3) n/a 17.6 5.0 160 1310 60 100 b t550b107(1)060(2)(3) 13030-06(1)(4)(5)l(6) 45.0 5.0 100 1660 75 75 b t550b756(1)075(2)(3) 13030-07(1)(4)(5)l(6) 42.2 5.0 110 1580 100 25 b t550b256(1)100(2)(3) 13030-08(1)(4)(5)l(6) 18.8 5.0 190 1200 (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert a = n/a, b= standard reliability, or t = high reliability. (3) to complete kemet part number, insert t = 100% matte tin (sn) plated, h = standard solder coated (snpb 5% pb minimum). designates termination fnish. tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 7 7 recommended voltage derating guidelines -55c to 85c 85c to 105c % change in working dc voltage with temperature v r 78% of v r recommended maximum application voltage (as % of rated voltage) 80% of v r 63% of v r ripple current/ripple voltage permissible ac ripple voltage and current are related to equivalent series resistance (esr) and the power dissipation capabilities of the device. permissible ac ripple voltage that may be applied is limited by two criteria: 1 . the positive peak ac voltage plus the dc bias voltage, if any, must not exceed the dc voltage rating of the capacitor. 2. the negative peak ac voltage in combination with bias voltage, if any, must not exceed the allowable limits specifed for reverse v oltage. the maximum power dissipation by case size can be determined using the below left table. the maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. refer to the below right table for temperature compensation requirements. case code maximum power lldl max ) mwatts at 25c with +60c rise kemet milCprfC39006/22/ 25/30/31 case size b t2 715 temperature compensation multipliers for maximum power dissipation (p max t 45c 45c < t 85c 85c < t 105c 1.00 0.50 0.10 t= environmental temperature using the p max of the device, the maximum allowable rms ripple current or voltage may be determined. ,pd p max /r (pd = p max /r i = rms ripple current (amperes) e = rms ripple voltage (volts) p max = maximum power dissipation (watts) 5 (65dvshlhgiuhthrkpv = ,pshgdhdvshlhgiuhthrkpv the maximum power dissipation rating must be reduced with increasing environmental operating temperatures. refer to the temperature compensation multiplier table for details. 0% 20% 40% 60% 80% 100% 120% -55 25 45 85 105 % working voltage temperature ( c) % 63 % tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 8 8 reverse voltage solid tantalum polymer capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. a small reverse voltage is permissible for time periods per the below table. kemet can offer lower capacitance in this voltage with higher reverse voltage capability. in addition, we continue to improve our capability for this characteristic. temperature permissible reverse voltage 25c 1 v for 8 hours maximum 70oc 1 v for 2 hours maximum 2swlpxp6roghu:dyh3uroh 0rxwlj all encased capacitors will pass the resistance to soldering heat test of milCstdC202, method 210, condition c. this test simulates wave solder of topside board mount product. this demonstration of resistance to solder heat is in accordance with what is believed to be the industry standard. more severe treatment must be considered refective of an improper soldering process. the above fgure is a r ecommended solder wave profle for both axial and radial leaded solid tantalum capacitors. tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 9 9 construction detailed cross section tantalum wire solder ta 2 o 5 dielectric (first layer) carbon (third layer) silver paint (fourth layer) polymer (second layer) wire lead (-) (100% sn / snpb) solder solder wire lead (+) (100% sn / snpb) anode tube hermetic seal system (glass seal and ring) aluminum can tantalum aluminum can hermetic seal system (ring) tantalum wire tantalum pellet (see detail for layers) hermetic seal system (glass seal) anode tube wire lead (-) (100% sn / snpb) wire lead (+) (100% sn / snpb) capacitor marking kt550 + 100f 10% 60v + 1202aaaa polarity marks rated capacitance b case series kemet id 4 digit date code, lot code capacitance tolerance, rated voltage (vdc) date code 3 digit 4 digit year 5 = 2015 6 = 2016 7 = 2017 8 = 2018 9 = 2019 15 = 2015 16 = 2016 17 = 2017 18 = 2018 19 = 2019 week 01 = 1 st week of the year to 52 = 52 nd week of the year tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 10 10 storage tantalum hermetically sealed capacitors should be stored in normal working environments. while the capacitors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. in addition, packaging materials will be degraded by high temperatureC reels may soften or warp and tape peel force may increase. kemet recommends that maximum storage temperature not exceed 40oc and maximum storage humidity not exceed 60% relative humidity. temperature fuctuations should be minimized to avoid condensation on the parts and atmospheres s hould be free of chlorine and sulphur bearing compounds. for optimized solderability capacitors stock should be used promptly, preferably within three years of receipt. packaging case size pieces per tray kemet eia b t2 20 weight case size average weight (grams) kemet eia b t2 3.63 tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 11 11 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america northeast wilmington, ma tel: 978-658-1663 southeast lake mary, fl tel: 407-855-8886 central novi, mi tel: 248-994-1030 irving, tx tel: 972-915-6041 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe sasso marconi, italy tel: 39-051-939111 skopje, macedonia tel: 389-2-55-14-623 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe wyboston, united kingdom tel: 44-1480-273082 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5877-1075 shanghai, china tel: 86-21-6447-0707 seoul, south korea tel: 82-2-6294-0550 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6701-8033 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2059_t550 ? 6/23/2016 12 12 disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. tantalum through-hole capacitors C hermetically sealed t550 axial polymer hermetic seal (phs) 105oc and dla series

▲Up To Search▲

Price & Availability of T550B107K008AH4251

	To Download T550B107K008AH4251 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .